2-3" ICON Suspension Stage 7 System | Tubular (Ford Bronco Sasquatch 2021-2023)

After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.

*All other brand lift kits are available.

ITEM# ICF417

MFG# K40017T

The ICON Vehicle Dynamics Stage 7 Suspension System for the 2021-2023 Ford Bronco features ICON's precision-manufactured, custom valved remote reservoir coilover shocks with CDCV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. These coilovers also allow for the adjustment of ride height to yield 2-3” of front lift and 1.25-2.25” of rear lift over stock 4-door Broncos with the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain. The included CDC Valves control fluid flow under compression, allowing you to achieve the perfect shock tune whether driving on the street, slow-crawling through the rocks or mobbing across the desert at full throttle. To accommodate the increased travel and lift height afforded by the ICON Coilovers, this Stage 7 kit comes with Tubular Upper Control Arms which provide caster correction and feature ICON's patented Delta Joint PRO, which allows for up to 90-degrees freedom of movement. Stage 7 also includes the complete tubular rear link kit including upper links and ICON's Adjustable Rear Track Bar. The added upper links have been designed for clearance from the fuel tank during maximum articulation and feature greaseless bushings and massive FK rod ends just like the lower links. The Adjustable Track Bar also features ICON's dual-durometer greaseless bushing and an FK Rod End, as well as on-vehicle adjustability for perfectly aligning the Bronco's rear axle for any lift height. The rear shocks are oriented shaft-up with unique triple-rate coil springs to achieve the most rear suspension travel and the best ride quality possible.
 

• Improved suspension performance and ride quality over stock✔
• Up to 11.5" front / 14” rear wheel travel with 35” tire fitment✔
• Vehicle specific tuned remote reservoir front and rear coilover shocks for superior damping and vehicle control, even under hard use✔
• Coilovers equipped with CDC Valves for 10 settings of compression damping adjustment, from soft to hard✔
• Adjustable coilovers yield up to 2-3" of front lift height and 1.25-2.25” of rear lift height over stock 4-door Broncos with the Sasquatch package✔
• PTFE lined spherical bearings and application specific mounting hardware✔
• 6061 Aircraft grade aluminum CNC machined components✔
• Corrosion resistant CAD plated coilover shock bodies with 7/8” diameter shafts✔
• ICON engineered coil springs featuring a unique triple rate rear coil design✔
• High strength alloy CNC machined lower bar pins✔
• Tubular UCAs for added strength, durability, and alignment correction for better drivability✔
• UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation.✔
• Tubular rear lower links improve rear end articulation and allow for pinion angle adjustment✔
• Adjustable tubular rear upper links improve fuel tank clearance under max articulation and help further free up suspension bind✔
• Adjustable rear track bar helps to free up bind during rear suspension travel and articulation and offers on-vehicle rear end alignment✔
• 100% Bolt-on system - no drilling, cutting, or welding necessary for install✔

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17x8.5" w/ 4.75” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: 18x9" w/ 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Wheels: 20x9" w/ 5.00” Backspace / 0mm Offset
• Recommended Aftermarket Tires: 35" x 12.50" (37" tires require coilover bump stop spacers along with minor trimming)
• APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.
• APPLICATION NOTE #66: 2 DOOR MODELS WILL SIT TALLER THAN 4 DOOR MODELS.
• APPLICATION NOTE #132: WHEN RUNNING 37" TIRES USE UP TRAVEL LIMITERS PART #611075 IN THE FRONT
• APPLICATION NOTE #133: WHEN RUNNING 37" TIRES USE UP TRAVEL LIMITERS PART #611074 FOR THE REAR
• APPLICATION NOTE #134: LIFT HEIGHTS & APP NOTES BASED ON SASQUATCH EQUIPPED VEHICLES
• APPLICATION NOTE #136: WHEN RUNNING ICON TUBULAR LOWER LINKS USE PART #611073
• TECH NOTE: Fitment testing done with ICON & OE steering components. Due to tight clearances to front coilovers, certain aftermarket steering components may not be compatible.
• TECH NOTE: Triple rate rear coils are optimized for improved suspension performance and ride quality for a near-stock weight Bronco. Their softer initial spring rates will net lower than advertised ride heights as weight is added to the rear of the vehicle. For heavier equipped Broncos, consider part number K40017TX.
• TECH NOTE: Bronco Everglades will have front lift height range of 1.5-2.5" over stock
• TECH NOTE: Not compatible with Bronco Raptor

• 48700C (QTY: 1) | 21-23 BRONCO FRONT 2.5 VS RR CDCV COILOVER KIT
  # 48700C Instruction Sheet
• 48400DJ (QTY: 1) | 21-23 BRONCO TUBULAR UCA DJ PRO KIT
  # 48400DJ Instruction Sheet
• 44100T (QTY: 1) | 21-21 BRONCO TUBULAR REAR UPPER LINK KIT
  # 44100T Instruction Sheet
• 44000T (QTY: 1) | 21-23 BRONCO TUBULAR REAR LOWER LINK KIT
  # 44000T Instruction Sheet
• 611073 (QTY: 1) | 21-23 BRONCO HOSE ROUTE KIT REAR LINK 1.75"
  # 611073 Instruction Sheet
• 44200T (QTY: 1) | 21-23 BRONCO REAR ADJ TRACK BAR KIT
  # 44200T Instruction Sheet
• 48710C (QTY: 1) | 21-23 BRONCO REAR 2.5 VS RR CDCV COILOVER KIT
  # 48710C Instruction Sheet

Local pickup welcome.

Some vehicles may require additional modifications or parts.

Guaranteed Fitment.

Questions Call us at (888) 814-1158