1. Home
  2. ::
  3. Lift Kits
  4. ::
  5. 2-3.25" ICON Suspension Stage 6 System | Tubular (Toyota Tundra 2022-2023)

2-3.25" ICON Suspension Stage 6 System | Tubular (Toyota Tundra 2022-2023)

2-3.25" ICON Suspension Stage 6 System | Tubular (Toyota Tundra 2022-2023)
View detailed images (1)
Item No ICT218 (#K53216T)
Quantity Set of Lift Kits
Our price: $10722.00
Drive
Height
Brand
Item/MFG #
Vehicle Info
Quantity

Product Details

After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.

 

*All other brand lift kits are available.

 

  OVERVIEW

ITEM# ICT218

MFG# K53216T

The ICON Vehicle Dynamics Stage 6 3.0 complete suspension system for the 2022-2023 Toyota Tundra builds upon the Stage 5 3.0 suspension system with the addition of triple rate rear coil springs and an adjustable rear track bar. To compliment the rear coils and track bar, 3.0 Series CDEV front coilovers are included along with tubular front upper control arms, a billet rear upper/lower link combo, a front sway bar drop kit, and 3.0 Series CDEV rear shocks. This system offers improved on- and off-road performance with adjustable compression damping, as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35" tires.
 

 

...Read more


This Stage 6 system features the 2022-2023 Toyota Tundra VS 3.0 Series remote reservoir front coilovers equipped with CDE Valves. These adjustable coilovers allow up to 2-3.25” of lift height adjustability over stock when using the ICON tubular front upper control arms, allowing the use of larger, more aggressive wheel and tire combinations. The larger 3.0 Series shocks offer 50% more piston surface area in the ride zone of the shock's travel, and 100% in the “Bump Zone”, compared to 2.5 Series shocks. The multi-stage hydraulic Bump Zone exponentially increases bottom-out resistance as the shock travels through the last 40% of travel, keeping vehicle dynamics in check during those hard hits or unexpected obstacles. Focus on driving and let ICON Intelligent Control (IIC) read the terrain and make near-instant adjustments via the Compression Damping Electronic Valve (CDEV) at each individual shock. Control the system wirelessly through the IIC app on your phone and once configured the system functions without driver input. Additionally, ICON’s Vehicle-specific shock length yields the maximum travel possible (up to 40% increase over stock), all translating into increased stability and vehicle control at the extremes of off-road use, with benefits also making themselves apparent in on-road driving conditions.

The included ICON tubular upper control arm kit is designed to improve the overall performance of the new 2022-2023 Toyota Tundra with corrected front-end geometry, built in additional caster, and improved suspension component clearance. Additionally, replacing the OE ball joint with the all-new, serviceable, and rebuildable ICON Delta Joint PRO allows for full bump and droop travel of the front suspension while eliminating bind.

The included sway bar drop brackets help minimize sway bar link bind through the suspension travel range. This helps the suspension move more freely and allows for the full range of wheel travel without overstressing any OE components.

The rear triple-rate coil design provides a softer droop and ride rates with a firmer overload rate that combine to deliver on-road comfort with excellent bottoming resistance and superior off-road performance. Specifically designed to net .5" of rear lift on a non-TRD Tundra or 0" of rear lift on a Tundra equipped with a TRD suspension Package desiring improved performance, but OE ride height.

ICON billet aluminum adjustable rear upper and lower links are made from CNC machined 6061 aluminum and anodized for corrosion resistance. These link arm kits feature PTFE-lined FK rod ends for increased suspension articulation, reduced deflection, and on-vehicle link arm length adjustability using ICON’s double adjuster system. Additionally, multi durometer bushings are installed that allow for noise free operation and maximum angularity without the need for periodic greasing and/or other maintenance.

The ICON Billet Rear Adjustable Track Bar helps center the axle of your lifted 2022-2023 rod end threads allows easy “on-vehicle” fine adjustment of track bar length without requiring removal or disassembly of the track bar. The track bar is CNC machined from solid 6061 aluminum bar, and anodized to match the look of ICON's billet upper and lower links.

Rounding out the Stage 6 suspension system are 3.0 Series rear remote reservoir shocks specially tailored for the 2022-2023 Tundra. 3.0 Series shocks boast 50% more piston surface area compared to 2.5 Series shocks, offering outstanding performance off-road and a smooth ride on the street. Increased internal oil volume and more external surface area compared to 2.5 Series Shocks, plus their remote reservoirs, offer even greater heat dissipation and resistance to shock fade under hard use. Also equipped with CDE Valves, these offer active, on the fly compression damping adjustment from soft to hard. Their pairing with the ICON V.S. 3.0 Series CDEV front coilovers results in balanced vehicle control from front to rear and an excellent overall driving experience for your Tundra.

 

 


  FEATURES & BENEFITS
  • Vehicle specific design for 2022-2023 Toyota Tundra✔
  • 3.0 Series front coilovers with ICON’s multi-stage, tunable hydraulic “Bump Zone”✔
  • Adjustable front ride heights from 2-3.25” of front lift over stock when used with included tubular UCAs✔
  • ICON's CDE Valve technology allows for in vehicle adjustment of compression damping settings and active adjustment via the ICON Intelligent Control (IIC)✔
  • ICON Intelligent Control (IIC) uses onboard sensors to monitor G-forces and movement of vehicle chassis along with user defined settings to actively make near instantaneous compression damping changes✔
  • Tubular UCAs for added strength, durability, and alignment correction for better drivability✔
  • UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation✔
  • Included sway bar drop brackets reduce bind in OE sway bar links✔
  • Allows for up to 40% increase in front wheel travel over stock without overstressing OE components✔
  • Billet rear upper and lower links improve rear end articulation and allow for on-vehicle pinion angle adjustment✔
  • Triple rate rear coil springs improve performance and ride quality while providing .5" of rear lift (non-TRD models)✔
  • On-vehicle adjustable rear track bar properly centers rear axle while also improve rear suspension performance✔
  • 3.0 Series rear remote reservoir shocks provide maximum performance, 20% increase in wheel travel, and balanced tune with coilovers✔
  • All ICON shock absorbers are fully rebuildable and re-tunable✔

 

  TECH INFO
  • OEM Wheels & Tires Fitment: Yes
  • Recommended Aftermarket Wheels: 17x8.5" w/ 5.75” Backspace / 25mm Offset
  • Recommended Aftermarket Tires: 35" x 12.50" (Minor fender trimming and modifications may be required)
  • APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. LIFT HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE.
  • APPLICATION NOTE #85: ADVERTISED LIFT HEIGHT RANGES ARE FOR A STOCK EQUIPPED VEHICLE. INCREASING WEIGHT OF VEHICLE DUE TO ACCESSORIES WILL ALTER LIFT RANGE.
  • APPLICATION NOTE #142: NOT COMPATIBLE WITH TUNDRAS EQUIPPED WITH LOAD-LEVELING REAR HEIGHT CONTROL AIR SUSPENSION.
  • APPLICATION NOTE #149: FOR 4WD MODELS WITHOUT TRD OFF-ROAD PACKAGE ICON RECOMMENDS USING ICON DIFF DROP (PART# 55156) OR USING TOYOTA TRD AXLES (PART# 434200C020 DRIVER / 434100C020 PASS). FAILURE TO DO SO COULD RESULT IN FRONT AXLE DAMAGE. NOT REQUIRED FOR TRD PRO.
  • TECH NOTE: If upgrading a Tundra equipped with Adaptive Variable Suspension (AVS) all other vehicle systems remain functional
  • TECH NOTE: Most Tundra sub-models equipped with i-Force gasoline engine will have front lift height range of 2-3.25" over stock
  • TECH NOTE: Most Tundra sub-models equipped with i-Force MAX hybrid engine will have front lift height range of 2-2.75" over stock
  • TECH NOTE: Tundra SR5 equipped with TRD Sport Suspension package will have lift height range of 3-4.5” over stock
  • TECH NOTE: Tundra TRD Pro will have lift height range of 0-1.5” over stock
  • TECH NOTE: Included rear springs net .5" of rear lift on a Tundra without TRD Off-Road or TRD Sport suspension packages. A Tundra equipped with TRD Off-Road or TRD Sport packages and TRD Pro will net 0" of lift, remaining at stock height in the rear. If taller rear ride heights are desired, consider ICON part # K53216TS.
  • TECH NOTE: Tundras equipped with automatic leveling headlights also require part number 55153

 

  SYSTEM COMPONENTS

 

Local pickup welcome.

Some vehicles may require additional modifications or parts.

Guaranteed Fitment.

Questions Call us at (888) 814-1158

 

 

Part Number: K53216T
 

Industry Leader in wheel distribution, Nationally, and Globally, Serving for

More than 30 years!!! Fast Shipping!

Aftermarket Fitment Guarantee

Our wheel specialists have years of experience in the aftermarket wheel industry and will provide you with expert knowledge of wheel fitments. They will help you find the perfect fit for your vehicle.

Wheel & Tire Packages

Make it convenient and order a complete wheel and tire package. We offer FREE mounting and balancing and FREE Lugs and Locks for all wheel and tire packages. Wheels will be shipped to you ready to install.

Fast Delivery

Audio City USA partners with the largest shippers in the US to make sure that you receive your order in a timely manner. Audio City USA strives to offer the fastest and most cost-effective shipping methods for our customers, but please understand that during this difficult time of price increases and staff shortages, there will be unforeseen delays. We ask our customers for their patience and understanding.

Lowest Price Guarantee*

We GUARANTEE the best prices for our customers.

FREE ROAD FORCE BALANCE with Any Wheels and Tires Package

The Road Force®Vibration Control System includes Hunter’s exclusive Road Force Measurement System. This system utilizes a “road roller” which measures the uniformity of the wheel and tires, simulating a road force test and verifying if the assembly is “round when rolling” under load.

Get it Now, Lease to Own!

Progressive Leasing
* No Credit Needed: Progressive Leasing obtains information from credit bureaus. Not all applicants are approved.
** 90-Day Purchase Options: Standard agreement offers 12 months to ownership. 90-day purchase options cost more than the retailer's cash price (except 3-month option in CA). To purchase early or to cancel the leaseyou must call 877-898-1970. Retailer cannot activate early purchase options.

Ownership by rental/lease agreement with Progressive Leasing costs more than the retailer’s cash price. Select items only. Cancel or purchase early at any time. Not available in MN, NJ, VT, WI, WY.

Affirm
"Rates from 0–36% APR. Payment options through Affirm are subject to an eligibility check and are provided by these lending partners: affirm.com/lenders. Options depend on your purchase amount, and a down payment may be required. CA residents: Loans by Affirm Loan Services, LLC are made or arranged pursuant to a California Finance Lenders Law license. For licenses and disclosures, see affirm.com/licenses. For example, a $800 purchase could be split into 12 monthly payments of $72.21 at 15% APR or 4 interest free payments of $200 every 2 weeks."
 
RECENTLY VIEWED
Recently viewed