2.5" ICON Suspension Stage 4 System (Jeep Gladiator 2020-2023)

After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.

*All other brand lift kits are available.

ITEM# ICJ122

MFG# K22104

The Stage 4 ICON 2.5” Suspension System for the Jeep Gladiator is the ideal setup for drastically improving on-road ride quality and overall performance for the daily driven application that will see frequent, moderate off-road use. This complete suspension system features 2.0 Aluminum Series shocks, 2.5” lift dual-rate front coil springs, a tubular steel fixed front lower link kit, billet front sway bar links, a triple-rate rear coil spring kit, a rear sway bar relocation kit, front and rear adjustable track bars, and all necessary hardware for install. This system provides an increase of over 30% front and 20% rear wheel travel and was designed around the use of a 35” tire. For those looking to run a 37” tire this can be achieved with the ICON Jeep JT Bump Stop Spacer Kit (Part #22071).

• 2.5" lift height✔
• Fits 35" tires (37" with extended bump stop spacer kit)✔
• 33% front, 23% rear increase in wheel travel✔
• Improves on and off-road ride quality over stock✔
• Front lower links included for caster angle correction and improved front end articulation✔
• Dual rate front coil springs with lifetime guarantee against sagging/breakage✔
• Triple rate rear coil springs with ICON-engineered droop, ride, and overload rates✔
• 2.0 Aluminum Series shocks with vehicle specific valving✔
• Front and rear track bars ensure proper alignment and improved articulation✔
• Adjustable, billet aluminum front sway bar links✔
• 100% bolt-on system makes for an easy install✔
• “ICON 1K” tested under rigorous off-road conditions to validate tune, performance, strength, and durability✔

• OEM Wheels & Tires Fitment: Yes
• Recommended Aftermarket Wheels: 17x8.5" w/ 4.5” Backspace / -6mm Offset
• Recommended Aftermarket Wheels: 18x9" w/ 4.5” Backspace / -12mm Offset
• Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22071)
• APPLICATION NOTE #127: WILL NOT FIT GLADIATOR MOJAVE TRIM
• APPLICATION NOTE #150: SHOCKS ARE FULLY SERVICEABLE
• TECH NOTE: ICON’s advertised lift heights are based around a typical Jeep JT build which usually includes added weight of accessories such as heavier front bumper/winch. Lift heights may be higher than advertised if installed on a stock weighted vehicle.
• TECH NOTE: Diesel models will net approx. 1.75" of front lift over stock due to their heavier weight.
• Ships In Multiple Boxes

• 22021 (QTY: 1) | 18-UP JL/20-UP JT FRONT FIXED LOWER LINK KIT
  # 22021 Instruction Sheet
• 22025 (QTY: 1) | 18-UP JL/20-UP JT 2.5" FRONT DUAL RATE SPRING KIT
  # 22025 Instruction Sheet
• 22066 (QTY: 1) | 20-UP JT 1.5" REAR MULTI RATE SPRING KIT
  # 22066 Instruction Sheet
• 22061 (QTY: 1) | 18-UP JL/20-UP JT FRONT SWAY BAR LINK KIT
  # 22061 Instruction Sheet
• 22062 (QTY: 1) | 20-UP JT REAR SWAY BAR RELOCATION KIT
  # 22062 Instruction Sheet
• 22027 (QTY: 1) | 18-UP JL/20-UP JT FRONT ADJ TRACK BAR KIT
  # 22027 Instruction Sheet
• 22068 (QTY: 1) | 20-UP JT REAR ADJ TRACK BAR KIT
  # 22068 Instruction Sheet
• 26523 (QTY: 2) | 18-UP JL/20-UP JT 2.5" FRONT 2.0 VS IR
  # 26523 Instruction Sheet
• 26527 (QTY: 2) | 20-UP JT 2.5" REAR 2.0 VS IR

Local pickup welcome.

Some vehicles may require additional modifications or parts.

Guaranteed Fitment.

Questions Call us at (888) 814-1158