After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.
*All other brand lift kits are available.
YEARS |
MAKE |
MODEL |
DRIVE |
2018-2024 |
Ford |
Expedition |
4WD |
ITEM # |
RCF701 |
MFG # |
40231, 40231RED, 40240, 40240RED |
Height |
3" |
Est. Install Time |
4 - 6 hours |
Instructions |
Recommended Tires & Wheels |
Tire |
Wheel |
Bolt Pattern |
Offset |
Note |
Stance ⓘ Stance is how much wider the new wheels and tires arewhen compared to the stock setup. • Mild: 0 - 1.5" wider than stock • Moderate: 1.5 - 3.25" wider than stock • Wide: 3.25" + wider than stock |
---|---|---|---|---|---|
|
|||||
285/55R20 |
20x9 |
6x135 |
+18, +20 |
- |
Moderate |
285/60R20 |
20x9 |
6x135 |
+18, +20 |
- |
Moderate |
⚠ Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.
PARTS |
FRONT (2) Upper Control Arms (2) N3 Loaded Struts REAR (2) Strut spacers (4) Preload Spacers Hardware (2) Inner Tie-Rod Turnbuckles (2) Inner Tie-Rods (2) Outer Tie-Rod Ends (2) Upper Control Arms (2) Lower Control Arms |
You need a little lift in your life. Are you looking to equip your Expedition with larger tires and set your vehicle apart from the pack? Rough Country's 3-inch Strut Kit is the perfect way to eliminate the pesky nose-down look from the factory and give your Expedition more ground clearance and impressive good looks. Each kit contains all necessary components to not only lift your vehicle but ensure that your wheels are centered within the wheel well!
Innovative Design and Construction. You don't need some wimpy lift kit that spoils the ride quality of your SUV. You need something tough, something that can handle whatever you throw at it. That's where Rough Country comes in. Rough Country’s 3-inch strut lift for your Expedition has forged aluminum front upper control arms that feature a corrected ball joint angle to ensure that your suspension geometry maintains a factory-like angle to ensure that you retain that smooth, comfortable ride you love so much.
Installation. Featuring a bolt-on installation process equipping your Expedition couldn't be easier. This kit can be completed efficiently and quickly with an estimated timeframe of 4-6 hours!
Local pickup welcome.
Some vehicles may require additional modifications or parts.
Guaranteed Fitment.
Questions Call us at (888) 814-1158