After you complete your purchase, one of our experts will contact you to verify proper fitment. 
The vehicle information you provided will be saved.

*All other brand lift kits are available.

• Heavy Duty 1/4" Thick, High Arched Crossmember ✔
• Ductile Iron Steering Knuckles ✔
• Impact Struts ✔
• Billet Sway Bar End Links ✔
• Rear Add-a-leaf ✔
• Rear Block & U-bolt Kit ✔

⚠ Notes - Important ⚠

• Will NOT fit vehicles with AutoRide shocks. ✔
• Early 2000 Models may require 1999 box kits. If factory transmission crossmember is straight use 2000-06 applications. If factory transmission crossmember is curved in an S-shape use 1999 applications. ✔
• Larger tires cannot be installed on OEM wheels. ✔
• If vehicle is equipped with OEM 17” wheels must use 17” or larger aftermarket wheels. ✔
• Will NOT fit all wheel drive models. ✔
• On 2005 and up GMC models use 33/12.50R17 tire with 17×8 wheels with 4 5/8” back spacing with minor trimming. ✔

Lift is accomplished via one-piece ductile iron drop down steering knuckles attaching to heavy duty 1/4" thick, high arched lower control arm crossmembers. Fabtech’s combination of steering knuckles and high arched crossmembers provides superior ground clearance for the true offroader. The front differential is relocated with a cradle style bracket using bushings at just the proper angle to allow the use of the factory front driveshaft, without vibration on AutoTrac models. Solid steel billet sway bar end links with urethane bushings retain the factory front sway bar angle. The stock upper control arms and steering centerlink are retained in the factory position and do not have to be removed for installation. The front suspension is completed with crossmember impact struts and torsion bar drop down brackets. Rear lift is accomplished with a 5" block kit and add-a-leaf.

Some vehicles may require additional modifications or parts.