3.5" ReadyLIFT Suspension SST Lift Kit (RAM 1500 2019-2023)

After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.

*All other brand lift kits are available.

ITEM# RLD126

MFG# 69-1935

• 2019-2023 Ram 1500 2WD/4WD 3.5 inch SST Lift Kit ✔
• NOT for use on air-suspension equipped trucks CNC machined billet aluminum construction front spacers ✔
• Fabricated steel rear spacers Includes heavy-duty control arms ✔
• Solid Mount and even load distribution OEM Style Cast Blocks ✔
• Will NOT deform or change shape ✔
• No Cutting of OEM Parts or Welding ✔
• Made in USA. ✔
• Tire: 35x12.50 20x9 +0 ✔
• Note: NOT for use on trucks that are factory pre-lifted/leveled or that have the "off-road package". Check factory height prior to ordering or installing. This kit is NOT recommended for trucks with more than 22" of wheel hub to fender lip height. **Will NOT fit Ram TRX models. ✔

ReadyLIFT offers a mild lift solution to properly enhance the stance and driving quality of the 2019-2023 Ram 1500 truck 2WD/4WD. Like the body design, the suspension design of the 2019-2023 Ram 1500 features some unique design elements that differ from the previous generation Ram. These differences were tackled by ReadyLIFT's engineers as a result, we now offer a new SST lift kit exclusively for the new Ram 1500 2WD/4WD trucks.
The 69-1935 SST lift kit provides 3.5" of front lift and 2" of rear lift. The new body style Ram now comes with a composite upper control arm with a sheet metal cover. ReadyLIFT's engineers determined the the best kit solution would be to include ReadyLIFT's DOM tube steel upper control arms with corrected ball joint angles. The lift is delivered by way of CNC-machined billet aluminum top mount strut extensions and spring pre-load spacers. This combination generates a true 3.5" of front lift which is perfect for installing up to a 35" tall tire on a 20x9 inch wheel with a 0 offset. This lift works great without exceeding the CV limits which works well within the OEM tolerances.
The 2019-2022 has a new rear set up which requires an all-new fabricated steel rear coil spring spacer. This spacer provides 2 inches of rear lift and also includes rear bump stop extensions to control compression. ReadyLIFT's 69-1935 3.5" SST Lift Kit will get the job done right and affordably.
Not for use on factory air suspension equipped trucks. NOTE: NOT intended for off-road use or abuse. NOTE: If running a 35x12.50-20, the minimum wheel offset is 0 offset on a 9" wide wheel. If running a 295/65-20 the minimum is a +18 offset to ensure the tire does not rub the control arm at full turn.

Max tire: 35x12.50 on a 20x9 with‚ 0 offset.

Tire Size Note: ReadyLIFT wheel and tire fitment recommendations are typically based on Wheel Pros wheels and Nitto tires. Due to product differences among tire manufacturers, tire specifications and dimensions including, but limited to, overall diameter, rolling diameter, tread width, aspect ratio, lug pattern, sidewall construction and inflation pressure, will vary meaningfully by tire and wheel manufacturer. Every tire and wheel combination should be test fit prior to installation. Consult your local installer to learn more about the right tire fitment for your application.

Ride Quality Note: When lifting a vehicle and installing aftermarket wheels and tires, a tire manufacturer's construction and material quality can alter vehicle ride quality. When increasing a vehicle wheel and tire size, most larger aftermarket truck and SUV tires are 10-ply (or more) E tires compared to typical OEM 6-ply C tires. This more rigid sidewall construction increases the perception of suspension stiffness often described as ride harshness. The ride, handling, traction, noise, fuel economy, and wear differences between All-Season, All-Terrain, Mud-Terrain, or Trail-Terrain type tires can be significant. Please take into account tire and wheel choice will generally have a meaningful impact on the ride & handling experience.

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended.

Estimated Installation Time: 6.5 Hours +/- 1 hour (excluding alignment and wheel/tire assembly)

View Instruction Sheet

· Tubular upper control arms with corrected ball joint cup angles and heavy-duty ball joints
· CNC machined billet aluminum top hat spacers and pre-load spring spacers
· Heavy-duty fabricated steel rear coil spring spacers
· Fabricated steel rear bump stop landing pads

Local pickup welcome.

Some vehicles may require additional modifications or parts.

Guaranteed Fitment.

Questions Call us at (888) 814-1158