After you complete your purchase, one of our experts will contact you to verify proper fitment.
The vehicle information you provided will be saved.
*All other brand lift kits are available.
YEARS |
MAKE |
MODEL |
DRIVE |
2025 |
Ram |
1500 |
4WD |
ITEM # |
RCD144 |
MFG # |
88330 |
Height |
6" |
Est. Install Time |
7-8 hours |
Instructions |
Recommended Tires & Wheels |
Tire |
Wheel |
Bolt Pattern |
Offset |
Note |
Stance ⓘ Stance is how much wider the new wheels and tires arewhen compared to the stock setup. • Mild: 0 - 1.5" wider than stock • Moderate: 1.5 - 3.25" wider than stock • Wide: 3.25" + wider than stock |
---|---|---|---|---|---|
|
|||||
35x12.50R20 POPULAR★ |
20x9 |
6x5.5 |
+0 |
- |
Moderate |
35x12.50R22 POPULAR★ |
22x10 |
6x5.5 |
-19 |
- |
- |
295/60R20 |
20x10 |
6x5.5 |
-18, -19, -24, -25 |
- |
- |
35x12.50R20 |
20x10 |
6x5.5 |
-18, -19, -24, -25 |
- |
- |
35x12.50R20 |
20x12 |
6x5.5 |
-44 |
Trimming Required |
Wide |
295/60R20 |
20x9 |
6x5.5 |
+0, +1, -12 |
- |
Moderate |
35x12.50R20 |
20x9 |
6x5.5 |
+1, -12 |
- |
Moderate |
35x12.50R22 |
22x10 |
6x5.5 |
-18, -24, -25 |
- |
- |
35x12.50R22 |
22x12 |
6x5.5 |
-44 |
Trimming Required |
Wide |
⚠ Due to differences in manufacturing, dimension and inflated measurements, tire and wheel combinations should be test fit prior to installation.
PARTS |
FRONT Lifted Knuckles Strut Spacers Preload Spacers Front Crossmember Rear Crossmember Differential Drop Brackets Driveshaft Spacer Sway-Bar Drop Brackets Skid Plate Hardware REAR Coil Spacers Sway-Bar Links Track Bar Bracket Bump-Stop Extensions Brake Line Brackets Hardware SHOCKS (2) Premium N3 Shocks |
Explore New Heights. Ram's updated fifth generation 1500 features an impressive all-new design that’s built from the ground up, with aggressive angles and head-turning stylings that fit in beautifully when transformed with Rough Country’s 6-inch Suspension Lift.
Innovative Design and Construction. When changing a vehicle's suspension, the key to preserving ride quality is keeping the geometry of all suspension components as close to their factory angles as possible. This suspension kit combines the use of durable steel knuckles, differential brackets, and drop cross members to reduce cv angles and simulate factory angles all while achieving new heights. Featuring a set of upper strut spacers that offer uncompromised strength and rigidity, gaining lift height is no issue. Completing the rear of this suspension kit is a set of rear coil spacers, track bar relocation bracket, and sway bar links that allow you to retain factory-like geometry. This combined setup provides enough clearance to run 35" tires without additional modifications.
Installation. With minor cutting and a strut compressor required to install, an estimated timeframe of 7-8 hours is recommended to complete this full installation. This full kit can be installed at home and can be completed efficiently and quickly!
Local pickup welcome.
Some vehicles may require additional modifications or parts.
Guaranteed Fitment.
Questions Call us at (888) 814-1158